How To Increase Vertical With Bungee Jumping


How To Increase Vertical With Bungee Jumping

Once you have mastered the skills needed to properly jump off of the ground, you may begin to wonder how do I jump that much higher? While there are many aspects that play into jump height, bungee jumping is one of the easiest and most effective ways to increase your vertical.

There is an ancient Japanese tradition that all jumpers must perform before jumping into the water called “Bungee Dead Man’s Curve.” This is performed to improve your balance, coordination, and even your reflexes. In this particular jump training routine, the jumper holds a stick that is attached to the ground and has a rope attached to the stick.

Increase Vertical With Bungee Jumping
How To Increase Vertical With Bungee Jumping

Things To Keep In Mind

The thing to keep in mind is that this routine requires the jumper to hold the rope as they jump. The rope should not be mentioned or else the person will not be able to reach the next level and will simply fall down. So, instead of using the rope, the jumper holds it until the last second.

After performing this basic jump training routine, the jumper will. Then be tested on how far they can go with a standard. 30-degree bend in the knees while still holding the rope. Once the performer surpasses the requirement on this occasion. He or she can expect to have a feel for how long it takes. To hold the rope correctly and how far they can jump.

Jumping many times is always going to be helpful, but once you get out of the “technique” realm. Some new types of bungee jumping will be more practical. One such new form of jumping is called “crowding.” Crowding is when you use many people to stand up at once, and this allows the jumper. All to hit the top of the jump.

Another type of jumping technique, which involves raising the rope to the top of the jump, is called “surfing.” Surfers ride the rope up the course and they stand in a group while they are doing so.

Increase Vertical With Bungee Jumping
How To Increase Vertical With Bungee Jumping

Knowing More About Traditional Bungee Rope

The traditional “bungee” rope was found in England in the eighteenth century. Since then, there have been many improvements that have been made in the equipment used. However, there is one standard type of rope that all bungee jumps are made with.

The more successful bungee jumpers use a fixed-length rope that can be adjusted for the jumper. It is also important to keep in mind that the length of the rope. It is not as crucial as it is for traditional bungee jumping.

The standard length of the rope used by the traditional jumpers is one foot five inches long. Since bungee jumping is typically done by professional practitioners. Thus, the main concern should be about safety and the experience of the jumper.

But, if you want to do multiple jumps, you need to be ready for just about anything. If the area is sloped, for example, the jumper will need to be aware of their direction of travel. As they go through the course, and they need to have the proper tools for moving their feet.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter